For those of you who have never done marbleizing, you will be quite surprised by the results and how color can be achieved without dyes. The picture below shows you what the original light peach color of the wool used in the sandwich looked like before and after the process. And I've folded the wool so you can see how each side of that wool changed color depending on wools chosen for the outside layer.
On the above photo to the left I used the brighter blue wool and olive green, with peach between. The wool on the right was the same light peach and on one side of the sandwich was golden brown and the other side was a navy blue. And, do you remember in yesterday's post there was a narrow strip of a brighter navy at one end? You can see what that did to the wool, look at the top of the wool on the right (above).
These are the wools which were used for the peach to the left in the above photo. Notice too, both sides of the olive wool changed colors also. The darker half was rolled against the blue, also that olive changed rolled against the bright blue as well. Interesting, eh?
Below shows both sides of the golden brown and both sides of the navy used for the other sandwich. I put both rolls in the same pot, and yes they were squished in tightly. You can see how the bleeding collected in certain areas.
Wish I could say this was planned, but it wasn't. The picture below shows that my beer wool color has been chosen. Whatever it was that I'd had planned for my son's beer previously, has changed. This is it.
If you want to see the wool pre dye pot, just scroll down to yesterday's blog post. For those of you who want to try this I'd love to see you post results on your blog. Since I don't have everyone's blog on my side bar sure hope I find out who tried it so I can see pictures.
If you think of a question while in the process or if I've left questions in your mind feel free to ask. Remember tho, if you are a NO-REPLY blogger I won't be able to reply to your e-mail if you post the question on my blog. But will be able to answer if you write me personally.
Have fun playing and Good Luck.
Saundra
Yesterday I posted pictures of the wool I would use in the 'marriage' pot which were sandwiched together. Here is a look inside the dye pot as it was beginning to bleed.
I was surprised that the red wasn't as good a bleeder as I'd thought it might be but it will still produce results to give otherwise flat colors a face lift.
As soon as that had been started I decided to grab 3 different wools to marbleize ~ a tan texture, a wine color and dark green. I sandwiched the wine between the tan texture and green and rolled just as I'd shown you yesterday.
Here is a peek inside that dye pot and boy was that green a bleeder, look at how the tan texture has changed already with lots of green dye left in the pot and I haven't put in that glug of white vinegar yet either.
So you let the pot of water and detergent simmer, I'm guessing I let mine simmer for over an hour.... do not boil because it will come out too stiff to use for hooking.
Once you think the water has a suitable color you the pour a glug of white vinegar in the pot as a mordant, about 1/3 cup, so the dye will grab the wool. I simmer maybe another 15 minutes after putting the vinegar in and then let the pot cool on the burner.
Since there was so much green dye left in the pot during the final simmering I threw in a couple extra smaller pieces to take advantage of the 'free' dye available.
After the pot has cooled down I untied the wool and rinsed well and tossed it all together in the dryer with two fluffy towels and dried it on low temperature.
Below are the results of the wool I showed you yesterday. The first picture is one side, and you will see there is a little variance from side to side so when the wool strip is cut I could pick which side best suits the hooking project.
And now is the reserve side of the wool. Sorry I could not get the pictures to rotate.
Next picture shows the results of the wool chosen for the second marbelizing job. And great choices of colors I chose this time. I love what happened to the tan textured wool and have plans for it. Either side is great to use. Here is side one:
And then here is the other side.
And below are those small random pieces I selected to soak up the remaining dye in the pot. After I simmered the pieces in the pot I put just a bit more white vinegar in the pot so it would absorb as much of the dye as possible.
The first piece was a small piece of natural, next was a very light tan herringbone strip, then was a tan texture but different than the one used above, with the last one being part of a pocket from the skirt panel used in the picture above.
So you can see how easy this is to dye without the expense of buying dye and to add a little variety to your beginning stash. Have fun experimenting.
