Finally bound the last two rugs....Posies and Stars plus Lancaster Barnyard. The stems of the posies are really a light mint green and the left star is a light blue so not as washed out as the photo indicates . This rug has a wool whipped edge.
Lancaster Barnyard was bound using the traditional cotton binding tape.
Since I don't make my labels until there is a full sheet of 6 labels here are the labels recently made out of fabric print sheets.
OOPS.... as I'm looking now notice my arrangement of description may be a little deceptive. My apologies to Primitive Heartstrings as your name should have been first as the designer and mine second since I'm the one who hooked it and is located in Seaford, DE.
Second apology goes to Lori Brechlin as her name should appear before mine as the designer and me as the one who hooked the rug. I'll have to be more diligent when typing up and printing labels in the future.
Two of the rugs were hooked in 2019 but at least now all finished rugs are labeled .
Even if I weren't self-distancing I wouldn't venture out of the house today as there are high winds of 60 mph, heavy rain, flooding, trees down across some roads with live wires down and potential for tornadoes in the afternoon.
Stay safe folks.
Saundra
www.woodlandjunctionprimitives.weebly.com
I've had several people inquire about the label on the Magdalena rug so thought that might be a good subject for posting on the blog. I made the labels myself and you can too. I'm sure there are many different ways to do labels and perhaps mine isn't the easiest, but will share how I did mine.
Since I was hooking or had hooked a few of Magdalena's rugs there was certain information which would be the same for all rugs so I typed that information in but allowed for spaces where statistics about the individual rug could be written in with permanent pen.
I used a Print Shop program to make the four labels on an 8 1/2" x 11" sheet of paper. That program also allowed me to select a border of my choosing. I then printed that piece of paper out and can use it again or if not a Magdalena rug can do a generic label.
In anticipation of this project I had previously soaked a piece of muslin cotton in a solution made using Bubble Jet and used the directions on the side of the bottle. I let the fabric dry and now have a sizable piece of fabric for me to make other labels at a later date.
Then I ripped a piece of prepared muslin (so it would be on the straight of grain) to the size of an 8 1/2" x 11" sheet of paper and ironed that onto the shiny side of freezer paper. Then cut the freezer paper to the exact measurements of the piece of muslin and printed the labels thru my copier.
You will need to check your printer instructions to see which side up you put that combo of freezer paper/muslin into your printer for it to print onto the fabric and not the freezer paper as that may vary from printer to printer.
I must admit that I held my breath until the paper/muslin came out and didn't jam up my printer. Then gave a huge sigh of relief and of accomplishment.
